SanAlert

السجل الرسمي الأمن

Unofficial threat level from the air for a place in Poland, worked out on your own computer.

ماذا يمكنك أن تفعل مع SanAlert؟

  • It runs on your computer and talks to the assistant over stdio.
  • When the assistant asks about a place, it fetches https://api.sanalert.pl/v1/state, the same
  • It looks the place's level up in that document with the rules SanAlert's website and apps follow
  • The privacy page says the same (sanalert.pl/prywatnosc, "Serwer SanAlert dla asystentów AI").

التثبيت

أضف هذا إلى إعدادات MCP في عميلك (Claude Desktop: claude_desktop_config.json، وCursor: ‏.cursor/mcp.json، ويستخدم VS Code وغيره الصيغة نفسها «mcpServers»).

PYPI package sanalert-mcp
Claude Code
claude mcp add sanalert -- uvx sanalert-mcp==1.0.1
إعداد JSON (Claude Desktop وCursor وVS Code)
{
    "mcpServers": {
        "sanalert": {
            "command": "uvx",
            "args": [
                "sanalert-mcp==1.0.1"
            ]
        }
    }
}

التوثيق

مأخوذ من ملف README للمشروع على GitHub ويُحدَّث أسبوعيًا. تفتح الروابط على GitHub.

المحتويات
  1. SanAlert for AI assistants
  2. What it does, and what it sends
  3. The tool
  4. Install
  5. Conditions of use
  6. Development
  7. License

SanAlert for AI assistants

The unofficial threat level from the air for a place in Poland, for an AI assistant that can run a local MCP server (Claude Code, Claude Desktop and others). Ask it "what is the level in Przemyśl?" and the assistant gets the answer the website would show for that place. Not an official warning system: it does not replace sirens, Alert RCB or instructions from the services.

What it does, and what it sends

  • It runs on your computer and talks to the assistant over stdio.
  • When the assistant asks about a place, it fetches https://api.sanalert.pl/v1/state, the same public document the website and the apps read: at most once every 5 s, with If-None-Match and the User-Agent SanAlert-MCP/<version>. Once per run it fetches the public grid (/v1/grid/1.json) to find the place's ~11 km square and its voivodeship.
  • It looks the place's level up in that document with the rules SanAlert's website and apps follow (sanalert.pl/jak-to-dziala). The place stays on your computer: no request carries it, and a town's name is never looked up online.
  • The privacy page says the same (sanalert.pl/prywatnosc, "Serwer SanAlert dla asystentów AI"). Terms (Regulamin, Умови).

The tool

sanalert_level takes place, one of the website's towns (Przemyśl, Lublin, Rzeszów, Chełm and the rest of its list; Polish letters optional, and Warsaw and Cracow work too), or latitude and longitude, and language: pl, en or uk.

FieldWhat it is
levelquiet, activity, approaching, near, no_data or out_of_range
level_name, saythe level's name and the website's sentence under it, in the chosen language
reason_code, kind, km, eta_min, course_known, lost_at, oblast, raion, threatwhat raised the level, as the website shows it
risk, confidence, degradedas in the state; degraded means the data may be delayed
data, no_data_reasons, data_age_s, generated_atwhether the level can be trusted now, and why not
placethe town or the point, its square (cell) and voivodeship
officialRCB and RSO messages in force for the voivodeship; null while that cannot be told
notice, attribution, pass_throughwhat has to stay with the data wherever it is shown

Blind is not calm. When the document is missing, cannot be read or is older than 60 s, or the grid cannot be read, the level is no_data, never quiet, and say says so. The age is never less than the time the server has held the document, so a computer clock that runs behind cannot keep an old "quiet" fresh while the API is down. A point outside Poland's grid is out_of_range. A name that is not on the list is an error that names the list: give coordinates instead.

For the whole of Poland (the state summarised, official messages of the last 24 hours, night reports, the reliability record) SanAlert runs a remote MCP server, https://api.sanalert.pl/mcp. It takes no place.

Install

It needs uv.

Claude Code:

claude mcp add sanalert -- uvx sanalert-mcp
claude mcp add --transport http sanalert-poland https://api.sanalert.pl/mcp      # optional: the whole of Poland

Or both at once, as a Claude Code plugin: /plugin marketplace add plrojek/agent-skills, then /plugin install sanalert@plrojek. Straight from GitHub instead of PyPI: uvx --from git+https://github.com/plrojek/sanalert-mcp sanalert-mcp.

Claude Desktop (claude_desktop_config.json):

{
  "mcpServers": {
    "sanalert": {
      "command": "uvx",
      "args": ["sanalert-mcp"]
    }
  }
}

Conditions of use

Whoever shows or repeats the data keeps notice visible with it and a visible link to every attribution entry, always refers readers to the official air-raid alarms (sirens, Alert RCB, the instructions of the authorities), keeps a visible link to NEPTUN (https://neptun.in.ua, for example "Дані: Карта повітряних тривог — NEPTUN") next to the level, never turns no data into quiet, and says that the level is SanAlert's inference, not an official warning. In full: terms and the API description.

Development

uv run pytest runs the tests; none of them goes online.

Three files in src/sanalert_mcp/ are generated, never edited by hand:

  • core.py is the Home Assistant integration's core.py, the same rules in the same words;
  • towns.json is the apps' town list (ios/SanAlertKit/Sources/SanAlertKit/Resources/towns-v1.json, made from the website's web/src/lib/cities.ts);
  • api_texts.json is the API's notice, attribution and pass-through (api/sanalert/state.py, api/sanalert/mcp_server.py).

python scripts/sync.py copies the first two and python scripts/sync.py --check fails on any difference (CI runs it). The API's tests fail when api_texts.json no longer matches the API.

The source is integrations/mcp/ in SanAlert's own repository; the public repository (github.com/plrojek/sanalert-mcp) is a copy of it, refreshed with each release, so a fix in core.py reaches users with the next release.

License

MIT, Applied AI sp. z o.o.

الأسئلة الشائعة

ما هو SanAlert؟

Unofficial threat level from the air for a place in Poland, worked out on your own computer.

كيف أثبّت SanAlert؟

يعمل على جهازك. في Claude Code: claude mcp add sanalert -- uvx sanalert-mcp==1.0.1. وفي العملاء الآخرين، الصق إعداد JSON من هذه الصفحة في إعدادات MCP الخاصة بهم.

هل يحتاج SanAlert إلى مفتاح API؟

لا يذكر إدراجه في السجل أي مفتاح أو سر إلزامي. قد تتطلب بعض الميزات حسابًا لدى الخدمة التي يتصل بها.

هل SanAlert مفتوح المصدر؟

نعم. شيفرته متاحة على GitHub بترخيص MIT.

من يصون SanAlert؟

ينشره plrojek. يدرجه AI.tn لكنه لا يصونه ولا يوصي به.

من سجل MCP الرسمي. الإدراج ليس توصية: راجع شيفرة الخادم وصلاحياته قبل منحه الوصول إلى بياناتك.